RCF vibe on Vibration Tour
Vibration Tour 2018, the summer tour of free concerts, was a success for Vibration Radio, a private French music radio station born in 1981. Four free concerts in the Center-Val de Loire region, provided an opportunity to bring together the artists of the moment, along with more than 72,000 people in the Center-Val de Loire region: Tours, Blois, Le Mans, Orléans, and Châteauroux. Different cities, different atmospheres, different artists such as Amir, Bob Sinclar, Boostee, Tal, Emmanuel Moire, Dadju, Kendji Girac, Soprano, Jeremy Frerot, Joyce Jonathan, Boulevard des Airs, Kungs and many others.
Behind the mixer we found Greg, front-of-house engineer who drove the sound system on RDNet and mixed the concert on a Yamaha CL5 console, assisted by Nico.b. On the monitoring side on stage, managed by Julien.S, there were 10 NX 15 SMA wedges and two 4PRO as side fills. All were mixed by Nicolas F. from a Yamaha TF5.
Produits connexes
DX 1616
MATRIX AUDIO PROCESSING UNIT
- Hybrid architecture DSP
- 48 KHz sampling, 40 bit floating point engine
- 16 x 16 I/O matrix
- Dante enabled network audio transport
SUB 9006-AS
SUBWOOFER ACTIF HAUTE PUISSSANCE
- SPL max : 142 dB
- Puissance de crête : 7 200 W – Puissance efficace : 3 600 W
- Réponse en fréquence : 30 Hz - 400 Hz
- 2 woofers 18"
HDL 30-A
MODULE LINE ARRAY ACTIF À DEUX VOIES
- Amplificateur à deux voies 2200 W
- SPL max : 137 dB
- Technologie FiRPHASE exclusive embarquée
- Contrôle et gestion par l’interface RDNet
HDL 6-A
MODULE LINE ARRAY ACTIF
- Amplication à deux voies 1400 W
- Diffuseur à compression en néodyme à bobine mobile 43,2 mm
- 2 x woofers en néodyme haute puissance 152,4 mm
- Traitement FIRPHASE
CR 16-ND
RACK DE CONTRÔLE
- Flight case de 10 unités de rack sur supports amortisseurs
- Processeur audio matriciel DX 1616
- Unité maître CONTROL 8
- Panneau de contrôle CP 16
RDNET CONTROL 8
UNITÉ MAÎTRE 8 SORTIES
- Connexion pc ethernet (contrôle à distance) et USB (contrôle direct) vers RDNet
- Contrôle jusqu’à 8 sous-réseaux de 32 périphériques esclaves
- Tous les périphériques sont scannés (« ATTENTE ACTIVE ») l’un après l’autre 10 fois par seconde
- Détecte automatiquement le positionnement de périphérique
TT 5-A
ENCEINTE ACTIVE DEUX VOIES À FORTE PUISSANCE
- Amplification 2 voies de 1600 watts
- Woofer néodyme 15", bobine 4"
- Traitement par DSP en 32 bits/96 kHz
- RDNet Ready